7

280 Chapter 11 Sample Editor
Display Waveform as Sample Bits
You can switch from the usual representation of the waveform, to one that shows the
structure of the recorded digital data, at high magnification levels on the detailed
waveform display. You do this by selecting View > Show as Sample & Hold. This can be
useful when eliminating clicks and pops from your recordings, for example.
Thanks to the clever use of oversampling techniques and lowpass filters at the D/A
conversion stage, the stored sample bits (on the right) are ultimately converted into a
signal waveform, more like the one shown to the left.
The Sample Edit Window in Use
Monitoring Sample Playback
Monitoring Sample Playback
There are various ways to play back the audio sections visible in the Sample Edit
window, allowing you to hear audio during edits. Playback occurs independently of the
song position. If you’d like to hear the selected audio passage in the context of the
song, just use the Transport controls, as usual.
Selecting the Audio Output
The small boxes below the loudspeaker symbol allow you to select the output channel
that you want to use for monitoring.
Set the number of the desired output in the Channel box under the loudspeaker
symbol.
Playback From the Overview
Monitoring playback from the overview display is performed in exactly the same way
as Regions in the Audio window. Simply click-hold at the point you want playback to
begin. Releasing the mouse causes playback to stop. You can also start monitoring
from any position by double-clicking on the overview.
Playing the Current Selection
To play back the current selection, click on the loudspeaker switch. You can also
perform this function with the Play/Stop Selection key command.