9

Alternate Send Edit Mode Options
Holding down the SEND button gives you access to a further submenu in the LCD. The
mode display shows S_ or S_., depending on whether you are in Send Mixer view or Send
Channel view.
ActionControl
Switches to Send Mixer view and selects destination.V-Pot 1 or F1
Switches to Send Mixer view and selects send level.V-Pot 2 or F2
Switches to Send Mixer view and selects position.V-Pot 3 or F3
Switches to Send Mixer view and selects mute.V-Pot 4 or F4
Switches to Send Channel view.V-Pot 5 or F5
Switches to Send Channel Strip 2 view: This mode is similar to Send
Channel view, but parameters are arranged in a slightly different
way. You can control one parameter for all Send slots used in the
selected channel strip.
• The mode display shows “SE.” (Send channel strip).
• The upper LCD row shows the name of the channel strip, the
text “Sends,” the page number, and total number of pages.
• V-Pots 1 to 8 edit the displayed parameter.
• The horizontal cursor buttons shift between pages. The number
of parameters that can be displayed simultaneously depends on
the number of Mackie Control XTs you have.
V-Pot 6 or F6
Switches to Destination/Level Mixer view. In this mode, you can
control one Send slot for all channel strips. Each channel strip
corresponds to the channel strip name shown in the upper LCD
row.
• The mode display shows d1 to d8, indicating the selected send.
• The upper LCD row shows channel strip names.
• The lower LCD row shows the destination of the selected send.
• Turning a V-Pot preselects the send destination.
• Pressing a V-Pot confirms the preselected send destination.
• The SOLO buttons edit send position—a lit SOLO LED indicates
Pre Fader mode.
• The MUTE buttons set the send mute status.
• The faders edit the send level.
V-Pot 7 or F7
Switches to Destination/Level Channel view. You can control all
Send slots for the selected channel strip in this mode. Each channel
strip corresponds to the (embossed) send number shown below
the LCD.
• The mode display shows “dL.”
• Turning a V-Pot preselects the corresponding send destination.
• Pressing a V-Pot confirms a preselected send destination.
• The Solo buttons edit send position—a lit Solo LED indicates Pre
Fader mode.
• The MUTE buttons set the send mute status.
• The faders edit the send gain.
V-Pot 8 or F8
77Chapter 3 Mackie Control