9

Channel Strip Setup View
Hold the TRACK button to display the Track shortcut menu on the LCD, and press V-Pot
8 or press F8 to enter Channel Strip Setup view. In this mode, you can edit the following
(less frequently used) parameters for the selected channel strip.
ActionControl
Edits the channel strip format (mono, stereo, left, right).V-Pot 1
Edits the Spread parameter.V-Pot 2
Selects the channel strip input assignment. Confirm by pressing
V-Pot 6.
V-Pot 3
Selects the channel strip output assignment. Confirm by pressing
V-Pot 7.
V-Pot 4
Edits the automation mode.V-Pot 5
Edits group membership. You can only choose one group or Off.
To make a channel strip a member of multiple groups, use Group
Edit mode.
V-Pot 6
Mackie Control: PAN/SURROUND Button
Pressing the PAN/SURROUND button activates Pan Mixer view. Press the button repeatedly
to switch between Pan Mixer and Pan Channel views.
Pan Mixer View
Pan Mixer view allows you to edit the pan parameter for all channel strips. The parameter
being edited is displayed briefly when switching to this mode.
• The mode display shows “Pn” (for Pan).
• The upper row of the LCD shows channel strip names.
• Turning the V-Pots changes the current pan parameter.
• Pressing the button on a V-Pot sets the parameter to its default value.
Note: Ensure that the ZOOM button isn’t active when using the cursor buttons.
Mackie Control: EQ Button
Pressing the EQ button activates EQ Mixer view. Pressing the button repeatedly switches
between EQ Mixer view and EQ Channel view.
Note: If no Channel EQ is present on the selected channel strip, a Channel EQ is inserted
automatically when you enter EQ Channel view.
73Chapter 3 Mackie Control