9

Mixer View
Mixer view allows you to edit a single parameter in multiple channel strips: volume, pan,
input format, input assignment, output assignment, or automation mode. When you
switch to Mixer view, the parameter being edited is briefly displayed on the right side of
the main LCD. The mode display shows “tr” (for track), and the upper row of the LCD
shows track names.
Press NAME/VALUE to display parameter values on the lower row of the LCD. These are
shown when you turn a V-Pot, or press its button.
You can manipulate the following controls for editing in Mixer view.
• Turning the V-Pots changes the associated channel strip parameter.
• Pressing the button on a V-Pot sets the parameter to its default value.
• The Cursor Left/Cursor Right buttons switch to the next or previous channel strip
parameter. The selected parameter is displayed briefly in the upper row of the LCD.
Note: Ensure that the ZOOM button isn’t active when using the cursor buttons.
Channel View
Channel view allows you to edit the most important channel strip parameters for a single
channel strip: volume, pan, instrument, Insert slot 1 assignment, Insert slot 2 assignment,
Send 1 level, Send 2 level, and Send 3 level. When you switch to Channel view, the mode
display shows “tr.”, and the upper row of the LCD shows the name of the channel strip.
Press NAME/VALUE to show parameter names in the upper row, and parameter values
in the lower row.
The following table lists what each V-Pot edits in Channel view mode:
ActionControl
Edits volume. The current value is shown in the lower row of the
LCD.
V-Pot 1
Edits pan. The current value appears in the lower row of the LCD.V-Pot 2
For software instrument tracks, turn to choose the instrument. Press
the V-Pot 3 button to confirm your choice, insert the instrument,
and open the plug-in window.
V-Pot 3
For audio and software instrument tracks, turn to choose the plug-in
used on Insert slot 1. Press the V-Pot 4 button to confirm your
choice, insert the effect, and open the plug-in window.
V-Pot 4
For audio and software instrument tracks, turn to choose the plug-in
used on Insert slot 2. Press the V-Pot 4 button to confirm your
choice, insert the effect, and open the plug-in window.
V-Pot 5
Edits the send level of Send 1.V-Pot 6
Edits the send level of Send 2.V-Pot 7
71Chapter 3 Mackie Control