9

ExplanationGlobal options
Nudges the selected regions or events by the chosen nudge value.
(See below.)
Nudge selected Regions/Events
Feedback only. On if any (track or region) Solo button is active.Any Solo
Controls the nudge value used for Nudge selected Regions/Events.
Switches between tick, division, beat, bar, frame, 1/2 frame.
Nudge Value
Sets the scrubbing status for the Playhead parameter (beats,
scrubbing). Possible values are set clock, audio scrubbing, shuttle.
Scrub Status
Switches the automation status of all tracks between the following
values: Off, Read, Touch, Latch, Write.
Automation of all tracks
Used by plug-ins to define special Alert mode. This is mainly of use
to control surface developers.
Alert Text, Alert Button, Alert
Icon
Used to temporarily disable a modeless assignment, by using the
Exclusive checkbox. See Control Name Field.
Dummy
Toggles the Cycle function on and off.Cycle
Toggles the Autopunch function on and off.Autopunch
Allows you to move the playhead to a marker number. An additional
number field below the Parameter pop-up menu is used to
determine the destination marker number.
Go to Marker
Sets the automation group clutch; automation groups are disabled
when the clutch is enabled. For buttons, sets the group clutch to 1
when the button is pressed, and sets it to 0 when the button is
released.
Group Clutch
Used by some control surfaces (such as the HUI) to process incoming
Active Sensing messages.
Active Sense
Sets the shuttle (forward and backward) speed directly. Use this for
controllers (usually knobs) that send an absolute, rather than relative,
value.
Shuttle Speed
Sets the waveform zoom level in the key focus Arrange area.Waveform Zoom
Sets the Quantize value in the key focus window (if this parameter
is available).
Quantize value
Sets the Division value in the key focus window (if this parameter
is available).
Division
Sets horizontal zoom in the key focus window (if this parameter is
available).
Horizontal Zoom
Sets vertical zoom in the key focus window (if this parameter is
available).
Vertical Zoom
Channel Strip
Choosing the Channel Strip class lets you use an assignment to set a channel strip
parameter. A Channel Strip pop-up menu appears below the Class pop-up menu, offering
the following parameters.
52 Chapter 2 Customizing Controller Assignments