9

A new, blank zone appears in the Zone list. It is highlighted, allowing you to immediately
rename it.
2 Enter a name for the zone.
If you want to add controllers to the zone, see Assigning and Deleting Controllers in
Expert View.
To define a mode
1 Click the Add button in the lower-left corner of the Mode list.
A new, blank mode appears in the Mode list. It is highlighted, allowing you to immediately
rename it.
2 Enter a name for the mode.
If you want to add controllers to a mode, see Assigning and Deleting Controllers in Expert
View.
Reassigning a Controller in Expert View
The procedure for reassigning an active controller (an assigned controller in the active
mode) is different from that of an inactive controller (one with an assignment in an inactive
mode).
To reassign an active controller
µ
Use the Learn process described in Assigning and Deleting Controllers in Expert View to
assign an active controller (one with an assignment in the active mode), and choose one
of the options shown in the dialog:
• Cancel: Deletes the new assignment, retaining the existing assignment.
• Keep Both: Retains the new and old assignments. Used typically when one knob controls
multiple parameters as a macro.
• Reassign: Deletes all existing active assignments for this parameter. Used to reassign a
function key (F1 to F8, for example) to a new key command.
To reassign an inactive controller
µ
Use the Learn process described in Assigning and Deleting Controllers in Expert View to
assign a controller in an inactive mode. Note that the new assignment becomes part of
the active mode in the same zone that contained the previous, inactive assignment.
48 Chapter 2 Customizing Controller Assignments