9

• Mode list: Displays the modes for the currently selected zone. The first entry “(No Mode)”
is for modeless assignments. Select a mode in the list to see its assignments in the
Control/Parameter list, and make it the selected zone’s active mode. You can also
double-click a mode to rename it. See Getting to Know Zones and Modes.
• Control/Parameter list: Select the assignment you want to edit. The left column displays
the name of the control, and the right column displays the name of the parameter
being controlled (in an abbreviated form). The parameters of the selected assignment
appear in the fields to the right of the list. See Controller Assignments Window Expert
View Settings.
Note: You can select multiple assignments in the list, but only the parameters of the
first selected assignment are displayed. When multiple assignments are selected,
operations performed via the Edit menu can be applied to all selected assignments.
All other operations apply only to the first assignment.
• Controller Assignment Parameter area: All aspects of the selected controller assignment
parameter are shown, and can be changed, in this area. See Controller Assignment
Parameter Area.
• Input Message area: The port and MIDI input message can be altered directly. Some
fields in this section are merely displays, and cannot be changed. See Input Message
Area.
• Value area: The range of values, and response, of the controller assignment to incoming
messages is determined in this area. Feedback to the display of control surfaces can
also be determined here. See Value Area.
42 Chapter 2 Customizing Controller Assignments