9

NotesManufacturerSupported devices
The original Mackie Control hardware is similar to
the Logic Control. The front panel legend is
different, however. You should request a
Logic Control Lexan Overlay from Mackie. As
Logic Express also recognizes the Mackie Control
protocol, you may use any firmware version. If
your unit has firmware version 1.02 or later, you
can freely use either the Logic Control or
Mackie Control mode. See Mackie Control.
MackieMackie Control
Mackie-badged version of the Logic Control XT.
As Logic Express also recognizes the
Mackie Control protocol, you may use any
firmware version. If you have firmware version 1.02
or later, you can freely use either the Logic Control
or Mackie Control mode. See Mackie Control.
MackieMackie Control
Extender
A Mackie Control with Logic Control silk screening
(legend) and firmware version 2.0 or later
(including HUI emulation). As Logic Express also
recognizes the Mackie Control protocol, you may
use any firmware version. If you have firmware
version 1.02 or later, you can freely use either the
Logic Control or Mackie Control mode. See
Mackie Control.
MackieMackie Control
Universal
See Euphonix MC Pro, System 5-MC, MC Control,
MC Mix, and MC Transport.
EuphonixMC
See JLCooper MCS3.JLCooperMCS3
See Korg microKONTROL and KONTROL49.KorgmicroKONTROL
See CM Labs Motormix.CM LabsMotormix
The SAC-2.2/2k’s native mode is directly supported,
but it can also emulate a Mackie Control. You
should use the native mode. See Radikal
Technologies SAC-2K.
SAC-2.2Radikal Technologies
See Radikal Technologies SAC-2K.SAC-2kRadikal Technologies
See Roland SI-24.RolandSI-24
See Frontier Design TranzPort.Frontier Design GroupTranzPort
A stripped-down version of the US-428. See
Tascam US-428 and US-224.
TascamUS-224
Logic Express supports the US-2400’s native mode.
In contrast to its Mackie Control mode, all controls,
including the joystick, are supported. See
Tascam US-2400.
TascamUS-2400
See Tascam US-428 and US-224.TascamUS-428
34 Chapter 1 Basic Control Surface Setup