9

AssignmentModifierControl
Shifts to second function/use of some buttons.
(See descriptions of other buttons.)
4
While held down, Value Change mode is set to
Full. Turning the encoder to the right sets the
maximum value. Turning it to the left sets the
minimum value. The encoder also stops at its
default value. Also see description of other
buttons.
5
Enters Group Edit mode:
• When a channel strip group is selected, channel
strip membership is indicated by a lit SEL
button. Use this button to enable/disable
channel strip’s group membership.
• Virtual encoders 1 to 4 display properties of the
currently selected group.
• Virtual encoder buttons 1 to 4 enable/disable
properties of the currently selected group.
• When INSERT/PARAM is set to PARAM, the left
and right Tab Scroll buttons scroll through the
group properties. When set to INSERT, the
buttons scroll through the groups for editing.
6
Switches the Mixer to the Arrange view, displaying
all channel strips that correspond to tracks used
in the Arrange area, along with their signal flow.
The DM2000 channel strips will also reflect the
‘Arrange’ Channel Strip View mode.
*USER 4
Enables/disables the Group Clutch.7
Switches the Mixer to the Arrange view, displaying
all channel strips that correspond to tracks used
in the Arrange area, along with their signal flow.
The DM2000 channel strips will reflect the ‘Tracks’
Channel Strip View mode.
*USER 4
Creates a new group and enters Group Edit mode
(see above).
8
Switches Mixer to All view, displaying all channel
strips that exist in your project.
The DM2000 channel strips will also reflect the
‘All’ Channel Strip View mode.
*USER 4
Switches between the Arrange window and the
Mixer.
9
Shifts channel strips by one channel strip to the
left.
10
Shifts channel strips by one channel strip to the
right.
11
282 Chapter 24 Yamaha DM2000