9

AssignmentModifierControl
Pan selected: sets pan to center position.
If MATRIX 1 on Send 1 to 8 is selected: edits Send
pre/post position, activates/deactivates Send mute,
or sets Send level to default value.
Send Assign, Input, or Output selected: confirms
selection.
Encoder Select button
Cycles through automation modes.
With an automation mode button held down, sets
this automation mode.
AUTO
If ENCODER MODE [ASSIGN 4] off: selects channel
strip.
If ENCODER MODE [ASSIGN 4] on:
• BYPASS off: selects channel strip for plug-in
selection.
• BYPASS on: switches bypass state of currently
selected Insert slot.
SEL
Resets the volume level.*USER 4
Resets the volume level.MATRIX SELECT 1
Enables/disables the Solo button.SOLO
Disables Solo button of all channel strips.*USER 5
Enables/disables the Mute button.ON
Unmutes all channel strips.*USER 5
Displays channel strip name, or send, input, or
output assignment.
Channel strip display
Adjusts volume, or duplicates encoder assignment
in Flip mode.
Fader
Yamaha DM2000: USER-DEFINED KEYS Section
The following table outlines the USER-DEFINED KEY controls and their assignments:
Note: A modifier button (such as USER 4, preassigned to SHIFT/ADD) shown below a
control description indicates that the control has an alternate function while the modifier
is held down. Modifier buttons that need to be assigned manually by the user are shown
with an asterisk (*) that precedes the button name.
AssignmentModifierControl
Opens or closes the Audio Bin window.DISPLAY
Opens or closes the Transport bar window.1
Shifts channel strips by one bank to the left.2
Shifts channel strips by one bank to the right.3
281Chapter 24 Yamaha DM2000