9

AssignmentModifierControl
Pan Assignment mode:
• Parameter control 1 button
centers pan angle.
Send Assignment mode:
• Enables/disables Sends 1 to 4
or 5 to 8.
Plug-in Assignment mode:
• Confirms the plug-in selection
for Insert slots 1 to 4 or 5 to 8,
and enters Plug-in Edit mode
for the selected Insert slot.
Plug-In Edit mode:
• Sets value to default, or
switches buttons with two
states.
Selecting virtual encoders 1 to 4
(Use cursor keys, and then press
ENTER button.)
Pan Assignment mode:
• Parameter control 1 edits pan
or angle.
Send Assignment mode:
• Controls the Send level of
Sends 1 to 4 or 5 to 8.
Plug-in Assignment mode:
• Chooses Insert slot 1 to 4 or 5
to 8.
Plug-in Edit mode:
• Sets value.
Moving virtual encoders 1 to 4
(Use cursor keys, and then rotate
parameter wheel.)
Yamaha DM2000: LCD
The following table outlines the LCD assignments:
AssignmentDisplay
Active if counter is displaying SMPTE time code.TIME CODE
Active if counter is displaying bars/beats/divisions/ticks.BEATS
Displays SMPTE time code or bars/beats/divisions/ticks.Counter
Displays the encoder assignment as follows: Pan, Snd1 to Snd8,
S1As to S8As, In, Out.
SELECT ASSIGN
Yamaha DM2000: TRACK ARMING Section
The following table outlines the TRACK ARMING controls and their assignments:
276 Chapter 24 Yamaha DM2000