9

Note: A modifier button (such as USER 4, preassigned to SHIFT/ADD) shown below a
control description indicates that the control has an alternate function while the modifier
is held down. Modifier buttons that need to be assigned manually by the user are shown
with an asterisk (*) that precedes the button name.
AssignmentModifierControl
In Insert Display mode:
• Assigns Send 1 level of channel strips to
encoders.
• Assigns Send 1 level of the selected channel
strip to virtual encoders.
• Assigns Sends 1 to 4 of the selected channel
strip to virtual encoders. Use the ENTER button
to switch the bypass state of Sends 1 to 4.
In Channel Display mode:
• Assigns Send 1 level of channel strips to
encoders and virtual encoders.
Shows current Send 1 destination assignment,
when button is held down.
AUX 1
Same as AUX 5, but for Send 6*USER 4
Same as AUX 1, but for Send 2AUX 2
Same as AUX 5, but for Send 7*USER 4
Same as AUX 1, but for Send 3AUX 3
Same as AUX 5, but for Send 8*USER 4
Same as AUX 1, but for Send 4AUX 4
In Insert Display mode:
• Assigns Send 5 level of channel strips to
encoders.
• Assigns Send 5 level of the selected channel
strip to virtual encoders.
• Assigns Sends 5 to 8 of the selected channel
strip to virtual encoders. Use the ENTER button
to switch the bypass state of Sends 5 to 8.
In Channel Display mode:
• Assigns Send 5 level of channel strips to
encoders and virtual encoders.
Shows current Send 5 destination assignment,
when button is held down.
ParaAUX 5
Yamaha DM2000: ENCODER MODE Section
The following table outlines the ENCODER MODE controls and their assignments:
273Chapter 24 Yamaha DM2000