9

AssignmentModifierControl
Pan selected: sets pan to center position.
Send 1 to 8 selected: edits Send pre/post position,
activates/deactivates Send mute, or sets Send level
to default value.
Send Assign, Input, or Output selected: confirms
selection.
Encoder Select button
If AUTO off:
• AUX 8 off: selects channel strip.
• AUX 8 on: selects channel strip for insert
assignment.
If AUTO on:
• Cycles through automation modes. With an
automation mode button held down, sets this
automation mode.
SEL
Resets the volume level.*DAW SHIFT/ADD
Enables/disables the Solo button.SOLO
Disables Solo button of all channel strips.*DAW OPTION/ALL
Enables/disables the Mute button.ON
Unmutes all channel strips.*DAW OPTION/ALL
Adjusts volume, or duplicates encoder assignment
in Flip mode.
Fader
Yamaha DM1000: Stereo Channel Strip
The following table outlines the stereo channel strip control and its assignment:
AssignmentControl
Switches channel strip SEL buttons between channel and insert
selection duties.
AUTO
Yamaha DM1000: USER-DEFINED KEYS Section
These keys can be assigned to the following functions:
Note: A modifier button, such as SHIFT/ADD, shown below a control description indicates
that the control has an alternate function while the modifier is held down. Modifier
buttons that need to be assigned manually by the user are shown with an asterisk (*)
that precedes the button name.
AssignmentModifierControl
Opens or closes the Audio Bin tab in the Media
area.
DAW WIN STATUS
Enables/disables the Record Enable button of the
specified channel strip.
DAW REC/RDY 1 to 16
266 Chapter 23 Yamaha DM1000