9

AssignmentControl
Adjusts parameter selected in the ENCODER MODE and AUX SELECT
sections.
Moving virtual encoders 1 to 4
(Use cursor keys, and then rotate
parameter wheel.)
Meter Display Mode
Press the F4 button to select Meter Display mode. In this mode, the level meters for
channel strips 1 to 16 are displayed.
AssignmentControl
Display momentary and peak level.Level Meters
Yamaha DM1000: Data Entry Section
The following table outlines the data entry controls and their assignments:
Note: A modifier button, such as SHIFT/ADD, shown below a control description indicates
that the control has an alternate function while the modifier is held down. Modifier
buttons that need to be assigned manually by the user are shown with an asterisk (*)
that precedes the button name.
AssignmentModifierControl
Default: adjusts the value of the currently selected
parameter.
Parameter wheel
Switches the parameter wheel to Shuttle mode.* DAW SHUTTLE
Switches the parameter wheel to Scrub mode.* DAW SCRUB
Default: exits folder.
In Go to Marker dialog: cancels dialog.
[DEC] button
Opens or closes the Audio Bin tab in the Media
area.
* DAW ALT/FINE
Enters the selected folder.[INC] button
Yamaha DM1000: Channel Strips
The following table outlines the channel strip controls and their assignments:
Note: A modifier button, such as SHIFT/ADD, shown below a control description indicates
that the control has an alternate function while the modifier is held down. Modifier
buttons that need to be assigned manually by the user are shown with an asterisk (*)
that precedes the button name.
AssignmentModifierControl
Adjusts parameter selected in the ENCODER MODE
and AUX SELECT sections.
Encoder
265Chapter 23 Yamaha DM1000