9

AssignmentModifierControl
In Insert Display mode:
• Assigns Send 5 level of channel strips to
encoders.
• Assigns Send 5 level of the selected channel
strip to virtual encoders.
• Assigns Sends 5 to 8 of the selected channel
strip to virtual encoders. Use the ENTER button
to switch the bypass state of Sends 5 to 8.
In Channel Display mode:
• Assigns Send 5 level of channel strips to
encoders and virtual encoders.
• Shows current Send 5 destination assignment,
when button is held down.
AUX 5
Switches SEL buttons and encoder buttons
between normal behavior and setting a
parameter’s default value. When the AUX 6 button
is held down:
• Pressing a channel strip’s SEL button resets the
channel strip’s volume level.
• Pressing a channel strip’s encoder button resets
the channel strip’s pan value. (PAN also needs
to be selected in the ENCODER MODE section.)
AUX 6
Determines mode of channel strip SEL buttons
when the STEREO section AUTO button is off:
• AUX 8 indicator off: SEL button used for channel
strip selection
• AUX 8 indicator on: SEL button used for Insert
selection
AUX 8
Yamaha DM1000: ENCODER MODE Section
The following table outlines the ENCODER MODE controls and their assignments:
262 Chapter 23 Yamaha DM1000