9

AssignmentModifierControl
Switches the Mixer to the Arrange view, displaying
all channel strips that correspond to tracks used
in the Arrange area, along with their signal flow.
*DAW SHIFT/ADD
Clears overload LEDs.METER
Switches the Mixer to the All view, displaying all
channel strips that exist in your project.
*DAW SHIFT/ADD
Opens or closes a second Arrange window.*DAW ALT/FINE
Opens or closes the Sample Editor.EFFECT
Yamaha DM1000: AUX SELECT Section
The following table outlines the AUX SELECT controls and their assignments:
Note: A modifier button, such as SHIFT/ADD, shown below a control description indicates
that the control has an alternate function while the modifier is held down. Modifier
buttons that need to be assigned manually by the user are shown with an asterisk (*)
that precedes the button name.
AssignmentModifierControl
In Insert Display mode:
• Assigns Send 1 level of channel strips to
encoders.
• Assigns Send 1 level of the selected channel
strip to virtual encoders.
• Assigns Sends 1 to 4 of the selected channel
strip to virtual encoders. Use the ENTER button
to switch the bypass state of Sends 1 to 4.
In Channel Display mode:
• Assigns Send 1 level of channel strips to
encoders and virtual encoders.
• Shows current Send 1 destination assignment,
when button is held down.
AUX 1
Same as AUX 5, but for Send 6*DAW SHIFT/ADD
Same as AUX 1, but for Send 2AUX 2
Same as AUX 5, but for Send 7*DAW SHIFT/ADD
Same as AUX 1, but for Send 3.AUX 3
Same as AUX 5, but for Send 8*DAW SHIFT/ADD
Same as AUX 1, but for Send 4AUX 4
261Chapter 23 Yamaha DM1000