9

AssignmentControl
Pan Assignment mode:
• Parameter control 1 button centers pan angle.
Send Assignment mode:
• Enables/disables Sends 1 to 4 or 5 to 8.
Plug-in Assignment mode:
• Confirms the plug-in selection for Insert slots 1 to 4 or 5 to 8, and
enters Plug-in Edit mode for the selected Insert slot.
Plug-in Edit mode:
• Sets value to default, or switches buttons with two states.
Selecting virtual encoders 1 to 4
(Use cursor keys, and then press
ENTER button.)
Pan Assignment mode:
• Parameter control 1 edits pan angle.
Send Assignment mode:
• Controls the Send level of Sends 1 to 4 or 5 to 8.
Plug-in Assignment mode:
• Chooses Insert slot 1 to 4 or 5 to 8.
Plug-in Edit mode:
• Sets value.
Moving virtual encoders 1 to 4
(Use cursor keys, and then rotate
parameter wheel.)
Yamaha 02R96: LCD
The LCD displays different data, depending on the page selected with the F2, F3, and F4
buttons:
• INSERT ASSIGN/EDIT Display mode: Parameter details, plug-in selection, or plug-in
parameters. Press F2 to select this mode.
• Channel view mode: Encoder values and channel strip display. Press F3 to select this
mode.
• Level meters view mode: Press F4 to select this mode.
The following assignments are available in all three modes:
AssignmentDisplay
Active if counter is displaying SMPTE time code.TIME CODE
Active if counter is displaying bars/beats/divisions/ticks.BEATS
Displays SMPTE time code or bars/beats/divisions/ticks.Counter
Displays the Encoder assignment as follows: Pan, Snd1 to Snd8,
S1As to S8As, In, Out.
SELECT ASSIGN
Yamaha 02R96: USER-DEFINED KEYS Section
The following table outlines the USER-DEFINED KEY controls and their assignments:
256 Chapter 22 Yamaha 02R96