9

AssignmentModifierControl
Using *DAW AUTO OFF:
• FADER MODE [AUX 8] off: selects channel.
• FADER MODE [AUX 8] on: selects channel for
insert assignment, allowing you to insert effects.
Using the *DAW AUTO automation modes (WRITE,
TOUCH, LATCH, READ):
• Cycles through automation modes. Sets the
selected mode when an automation mode
button is held down.
SEL
Resets the volume level.*DAW SHIFT/ADD
Enables/disables the Solo button.SOLO
Disables the Solo button of all channel strips.*DAW OPTION/ALL
Enables/disables the Mute button.ON
Unmutes all channel strips.*DAW OPTION/ALL
Adjusts volume, or duplicates encoder assignment
in Flip mode.
Fader
Yamaha 01V96: Stereo Channel Strip Section
The following table outlines the stereo channel strip control assignment:
AssignmentControl
Switches SEL buttons 1 to 16 between channel strip and automation
mode selection. Pressing the SEL button repeatedly, when in
automation mode, rotates all available automation modes.
SEL
Yamaha 01V96: User-Defined Keys Section
These keys can be assigned to the following functions:
Note: A modifier button (such as SHIFT/ADD) below a control description indicates that
the control has an alternate function or use while the modifier is held down. Modifier
buttons that need to be assigned manually by the user are shown with an asterisk (*)
that precedes the control name.
AssignmentModifierControl
Opens or closes the Audio Bin tab in the Media
area.
DAW WIN STATUS
Enables/disables the Record Enable button of the
specified channel strip.
DAW REC/RDY 1 to 16
Opens or closes the Transport bar window.DAW WIN TRANSPORT
Shifts channel strips by one bank to the left.DAW BANK –
Shifts channel strips by one bank to the right.DAW BANK +
249Chapter 21 Yamaha 01V96