9

AssignmentControl
When Send 1 to 8 is selected: edits send pre/post fader position,
enables or disables send mute, or sets send level to default value.
Send, Input, or Output Assignment mode: confirms selection.
Selecting virtual encoders 1 to 4
(Use cursor keys, and then press
ENTER button.)
Meter Display Mode
Press the F4 button to select Meter Display mode.
AssignmentControl
Display momentary and peak level.Level Meters
Yamaha 01V96: SELECTED CHANNEL Section
The following table outlines the SELECTED CHANNEL controls and their assignments:
AssignmentControl
Adjusts the pan of the currently selected channel strip.Pan control
Yamaha 01V96: Data Entry Section
The following table outlines the data entry controls and their assignments:
Note: A modifier button (such as SHIFT/ADD) below a control description indicates that
the control has an alternate function or use while the modifier is held down. Modifier
buttons that need to be assigned manually by the user are shown with an asterisk (*)
that precedes the control name.
AssignmentModifierControl
Default: adjusts the value of the currently selected
parameter.
Parameter wheel
Switches the parameter wheel to Shuttle mode.*DAW SHUTTLE
Switches the parameter wheel to Scrub mode.*DAW SCRUB
Default: exits folder. In Go to Marker dialog: cancels
dialog.
[DEC] button
Opens or closes the Audio Bin tab in the Media
area.
*DAW ALT/FINE
Enters the selected folder.[INC] button
Yamaha 01V96: Channel Strips
The following table outlines the channel strip controls and their assignments:
Note: A modifier button (such as SHIFT/ADD) below a control description indicates that
the control has an alternate function or use while the modifier is held down. Modifier
buttons that need to be assigned manually by the user are shown with an asterisk (*)
that precedes the control name.
248 Chapter 21 Yamaha 01V96