9

AssignmentModifierControl
Switches SEL buttons and encoder buttons
between normal behavior and setting a
parameter’s default value.
When the AUX 6 button is held down:
• Pressing a channel strip’s SEL button resets the
channel strip’s volume level.
• Pressing a channel strip’s encoder button resets
the channel strip’s pan value (PAN also needs
to be selected in ENCODER MODE section).
AUX 6
Assigns Pan to encoders; assigns selected channel
strip’s pan parameters to virtual encoders.
AUX 7
Determines mode of channel strip SEL buttons:
• AUX 8 indicator off: SEL button used for channel
strip selection.
• AUX 8 indicator on: SEL button used for Insert
selection.
AUX 8
Enables/disables Flip mode.HOME
Yamaha 01V96: Basic LCD Functions
The following table outlines the LCD controls and their assignments:
Note: A modifier button (such as SHIFT/ADD) below a control description indicates that
the control has an alternate function or use while the modifier is held down. Modifier
buttons that need to be assigned manually by the user are shown with an asterisk (*)
that precedes the control name.
AssignmentModifierControl
Plug-in Edit mode: Shifts the parameter display to
show the next/previous page of parameter
controls (usually four) for the selected plug-in.
Left/Right buttons
Plug-in Edit mode: Shifts the parameter display
up/down by one parameter for the selected
plug-in.
*DAW ALT/FINE
Clears overload LEDs.F1
Switches the Mixer to the All view, displaying all
channel strips that exist in your project.
*DAW SHIFT/ADD
Opens or closes a second Arrange window.*DAW ALT/FINE
Yamaha 01V96: LCD Modal Display Functions
The LCD displays different data, depending on the page selected with the F2, F3, and F4
buttons:
246 Chapter 21 Yamaha 01V96