9

Yamaha 01V96: FADER MODE Section
The following table outlines the FADER MODE controls and their assignments:
Note: A modifier button (such as SHIFT/ADD) below a control description indicates that
the control has an alternate function or use while the modifier is held down. Modifier
buttons that need to be assigned manually by the user are shown with an asterisk (*)
that precedes the control name.
AssignmentModifierControl
In Insert Display mode:
• Assigns Send 1 level of channel strips to
encoders.
• Assigns Send 1 level of the selected channel
strip to virtual encoders.
• Assigns Sends 1 to 4 of the selected channel
strip to virtual encoders. Use the ENTER button
to switch the bypass state of Sends 1 to 4.
In Channel Display mode:
• Assigns Send 1 level of channel strips to
encoders and virtual encoders.
• Shows current Send 1 destination assignment,
when button is held down.
AUX 1
Same as AUX 5, but for Send 6.*DAW SHIFT/ADD
Same as AUX 1, but for Send 2.AUX 2
Same as AUX 5, but for Send 7.*DAW SHIFT/ADD
Same as AUX 1, but for Send 3.AUX 3
Same as AUX 5, but for Send 8.*DAW SHIFT/ADD
Same as AUX 1, but for Send 4.AUX 4
In Insert Display mode:
• Assigns Send 5 level of channel strips to
encoders.
• Assigns Send 5 level of the selected channel
strip to virtual encoders.
• Assigns Sends 5 to 8 of the selected channel
strip to virtual encoders. Use the ENTER button
to switch the bypass state of Sends 5 to 8.
In Channel Display mode:
• Assigns Send 5 level of channel strips to
encoders and virtual encoders.
• Shows current Send 5 destination assignment,
when button is held down.
AUX 5
245Chapter 21 Yamaha 01V96