9

AssignmentModifierControl
Modifier for NULL mode. NULL mode allows you
to update the fader positions to match the actual
volume (shown in Logic Express).
NULL
AUX 1 LED on: controls the Send 1 Level of the
selected channel.
AUX 2 LED on: controls the Send 2 Level of the
selected channel.
AUX 3 LED on: controls the Send 3 Level of the
selected channel.
AUX 4 LED on: controls the Send 4 Level of the
selected channel.
F3 LED on: data wheel is in Scrub mode.
None of the above is lit: data wheel is in Transport
mode, and moves the playhead in one-bar
increments.
Data wheel
Sets currently selected channel’s output.ASGN
Tascam US-428 and US-224: LOCATE Section
The following table outlines the LOCATE controls and their assignments:
AssignmentControl
Moves playhead to previous marker position.<< LOCATE
Moves playhead to next marker position.LOCATE >>
Creates a new marker at the current playhead position.SET
Tascam US-428 and US-224: BANK Section
The following table outlines the BANK controls and their assignments:
AssignmentControl
Shifts fader bank left by one bank. (A bank is a group of channels.)
The LED is lit if the leftmost fader bank has not been reached.
< BANK
Shifts fader bank right by one bank. The LED is lit if the rightmost
fader bank has not been reached.
BANK >
Tascam US-428 and US-224: Transport Section
The following table outlines the transport controls and their assignments:
AssignmentControl
Moves the playhead backward by one bar.REW
Moves the playhead forward by one bar.F FWD
Stops playback.STOP
Starts playback.PLAY
240 Chapter 20 Tascam US-428 and US-224