9

Table Of Contents
AssignmentModifierControl
Selects EQ band 3 (allowing use of Gain, Freq, and
Q controls for this band).
HIGH
Switches EQ band 3 bypass state.ASGN
Selects EQ band 4 (allowing use of Gain, Freq, and
Q controls for this band).
HI-MID
Switches EQ band 4 bypass state.ASGN
Selects EQ band 5 (allowing use of Gain, Freq, and
Q controls for this band).
LO-MID
Switches EQ band 5 bypass state.ASGN
Selects EQ band 6 (allowing use of Gain, Freq, and
Q controls for this band).
LOW
Switches EQ band 6 bypass state.ASGN
Tascam US-428 and US-224: Master Section Controls
The following table outlines the master section controls and their assignments:
Note: A modifier button (such as NULL) shown below a control description indicates that
the control has an alternate function or use while the modifier is held down.
AssignmentModifierControl
Switches data wheel between Transport/Scrub
mode and Send 1 Level.
AUX 1
Switches Send 1 Mute state.ASGN
Switches data wheel between Transport/Scrub
mode and Send 2 Level.
AUX 2
Switches Send 2 Mute state.ASGN
Switches data wheel between Transport/Scrub
mode and Send 3 Level.
AUX 3
Switches Send 3 Mute state.ASGN
Switches data wheel between Transport/Scrub
mode and Send 4 Level.
AUX 4
Switches Send 4 Mute state.ASGN
Modifier for function of EQ controls, AUX 1 to 4
buttons, PAN knob, and data wheel.
ASGN
Enables/disables Cycle mode.F1
Enables/disables Autopunch mode.F2
Enables/disables Scrub mode.F3
Controls panning of selected channel.PAN
Sets currently selected channel’s input.ASGN
239Chapter 20 Tascam US-428 and US-224