9

This chapter describes how to use your Tascam US-428 and Tascam US-224 with
Logic Express.
This chapter covers the following:
• Setting Up Your Tascam US-428 or US-224 (p. 237)
• Tascam US-428 and US-224: Assignment Overview (p. 237)
Setting Up Your Tascam US-428 or US-224
This section outlines the steps required to use your Tascam US-428 or US-224 control
surface with Logic Express.
To set up your Tascam US-428 or US-224 device in Logic Express
1 Install the latest version of the driver software needed for the US-428 or US-224.
2 Ensure that your US-428 or US-224 units are connected to the computer via USB.
3 Open Logic Express.
The unit is scanned for, and installed, automatically.
Tascam US-428 and US-224: Assignment Overview
The following sections outline the assignment of Tascam US-428 and US-224 interface
elements to Logic functions.
• Tascam US-428 and US-224: Channel Strips
• Tascam US-428 and US-224: EQ Section
• Tascam US-428 and US-224: Master Section Controls
• Tascam US-428 and US-224: LOCATE Section
• Tascam US-428 and US-224: BANK Section
• Tascam US-428 and US-224: Transport Section
237
Tascam US-428 and US-224
20