9

Note: A modifier button (such as SHIFT) shown below a button description indicates that
the button has an alternate function or use while the modifier is held down.
AssignmentModifierControl
Switches SI-24 to System mode. See SI-24 user
manual for details.
SYSTEM
Switches numeric keys to Locate mode.LOCATE
Switches numeric keys to Shortcut mode.SHORT CUT
Switches numeric keys to Screenset mode.SCREEN SET
System mode: See SI-24 user manual.
Locate mode:
• 1 to 9: Moves playhead to marker 1 to 9
positions.
• 0: Creates marker at playhead position.
Shortcut mode:
• 1: Saves project. LED is lit if project has changed
since last save.
• 2: Performs Undo (of last editing operation).
LED is on if a Redo is possible.
• 3: Copies the selection (of regions or events).
• 4: Pastes the Clipboard contents.
• 5: Deletes the selection.
• 6: Enables/disables Scrub mode. LED is on if
Scrub mode is enabled.
• 7: Enables/disables Cycle mode. LED is on if
Cycle mode is enabled.
• 8: Enables/disables Autopunch mode. LED is on
if Autopunch mode is enabled.
• 9: Switches Arrange window to Hyper Draw
volume view.
• 0: Switches Arrange window to Hyper Draw pan
view.
Screenset mode:
• 1 to 9: Recall screensets 1 to 9.
• 0: Enables/disables Lock Screenset command.
0 to 9
217Chapter 17 Roland SI-24