9

Roland SI-24: Assignment Overview
The following sections outline the assignment of Roland SI-24 interface elements to Logic
functions.
• Roland SI-24: Channel Strips
• Roland SI-24: STATUS MODE Section
• Roland SI-24: CH ASSIGN Controls
• Roland SI-24: MASTER Section
• Roland SI-24: Numeric Key Section
• Roland SI-24: Transport Section
Roland SI-24: Channel Strips
The following table outlines the channel strip controls and their assignments:
Note: A modifier button (such as SHIFT) shown below a button description indicates that
the button has an alternate function or use while the modifier is held down.
AssignmentModifierControl
In Pan mode:
• Switches the bypass state of EQ bands 1–4.
• Enters EQ/Send mode. If no Channel EQ is
present on the selected channel, a Channel EQ
is automatically inserted.
In EQ/Send mode:
• Switches the bypass state of EQ bands 1–4. The
button LED is lit when the EQ is enabled.
In Plug-in mode:
• Switches between Inserts 1–4. A lit button LED
indicates the selected Insert slot.
• If a plug-in window is open, it will update to
reflect the plug-in parameters of the selected
Insert slot.
EQ ON/OFF 1 to 4
In EQ/Send mode: Enables/disables Send 1–4
Mute.
SHIFT
Switches Channel view modes between:
• EQ/Send Edit mode (LED on).
• Pan Edit mode (LED off ).
EQ/SEND
Switches Channel view modes between:
• Plug-in Edit mode (LED on). (Plug-in window
opens.)
• Pan Edit mode (LED off ).
Plug-in window closes when Plug-in Edit mode is
exited.
PLUG-IN
214 Chapter 17 Roland SI-24