9

AssignmentModifierControl
• If in Send mode, switches to Mixer view
(multichannel) send level editing of Sends 1 to
4. Encoders 9 to 12 edit Destination, Level,
Pre/Post, and Mute of the selected channel. You
must confirm the send destination by pushing
the Encoder 9 button. While held down, use
Encoder 9 to select the desired Send number
(1 to 8). The button’s LED is lit when in Mixer
view Send Level Editing mode (of the selected
channel Send slot).
• If in Insert mode, switches to Mixer view plug-in
selection for Inserts 1 to 4. Plug-in selection is
confirmed by pressing the encoder’s push
button. While held down, use Encoder 9 to
choose the desired Insert slot number (1 to 15).
The button’s LED is lit when in Plug-in Selection
mode (of the corresponding channel Insert slot).
Snd/Ins 1 to 4
Switches to Mixer view, and displays audio
channels.
Audio
Switches to Mixer view.SHIFT
Switches to Mixer view, and displays MIDI channel
strips.
MIDI
Switches to Arrange (Track) view, and displays the
channel strips of all tracks used in the Arrange
window.
SHIFT
Switches to Mixer view, and displays input
channels.
Input
Switches to Mixer view, and displays the master
and output channels.
SHIFT
Switches to Mixer view, and displays (software)
instrument channels.
Inst
Switches to Mixer view, and displays aux channels.SHIFT
Switches to Mixer view, and displays bus channels.Bus
Switches to Single view.SHIFT
Switches to Group editing mode:
• Encoder 1 to 10 push buttons edit a group
property. (The property is shown in the LCD’s
lower line.)
• Encoder 11 scrolls through group properties.
• Encoder 12 selects a group to edit. Its name is
displayed in the lower LCD line, above Encoder
12.
• Select buttons 1 to 8 activate/deactivate group
membership of the channel.
Group
206 Chapter 15 Radikal Technologies SAC-2K