9

AssignmentModifierControl
Controls volume, or duplicates the parameter
assigned to the encoder above (if Flip mode is
enabled).
Faders 1 to 8
Controls the Master Level fader if it exists; if not,
controls Output 1–2 level.
Master Fader
Inserts a Channel EQ in the channel if no Channel
EQ is present.
EQ button
Radikal Technologies SAC-2K: Mixer View Mode Section
The following table outlines the Mixer view mode controls and their assignments:
Note: A modifier button, such as SHIFT, below a button description indicates that the
button has an alternate function or use while the modifier is held down.
AssignmentModifierControl
Switches to Mixer view (multichannel) pan editing.Pan
Switches to Mixer view (multichannel) gain editing
of a certain EQ band. Encoders 9 to 12 edit
Frequency, Gain, Q factor, and On/Off for the
selected channel. Pressing and releasing the
button chooses a specific EQ band. While held
down, you can use Encoder 9 to choose the EQ
band that you want to edit (bands 1 to 8). The
button’s LED is lit when in Mixer view Gain Editing
mode (of the selected channel EQ band).
• Low: Band 3 (first parametric EQ band)
• LowMid: Band 4 (second parametric EQ band)
• HiMid: Band 5 (third parametric EQ band)
• High: Band 6 (fourth parametric EQ band)
High, HiMid, LowMid,
Low
Switches the four Snd/Ins (1 to 4) buttons between
Send and Insert modes.
• LED off: Send mode
• LED on: Insert mode
Snd/Ins
205Chapter 15 Radikal Technologies SAC-2K