9

Mackie C4: Assignment Buttons
The Assignment buttons switch between “overlay” and normal view modes. The
parameters assigned to the V-Pots/V-Select buttons change accordingly when an overlay
mode is activated.
MARKER Button
Switches between Marker overlay (see Mackie C4: Marker Overlay Mode) and normal view
modes (see Mackie C4: View Modes).
TRACK Button
Switches between Track overlay (see Mackie C4: Track Overlay Mode) and normal view
modes (see Mackie C4: View Modes).
You can access alternate Mixer View options by holding down the TRACK button. This
displays a further submenu in the lower LCD, allowing you to view particular channel
types:
• V-Select 25 switches to MIDI Channel view.
• V-Select 26 switches to Input Channel view.
• V-Select 27 switches to Audio Channel view.
• V-Select 28 switches to Software Instrument Channel view.
• V-Select 29 switches to Auxiliary Channel view.
• V-Select 30 switches to Bus Channel view.
• V-Select 31 switches to Output Channel view.
• V-Select 32 switches to Master Channel view.
Releasing the TRACK button without pressing a V-Select returns you to Mixer view.
CHAN STRIP Button
Switches between Channel Strip overlay (see Mackie C4: Channel Strip Overlay Mode)
and normal view modes (see Mackie C4: View Modes).
You can access alternate User View options by holding down the CHAN STRIP button,
which displays a further submenu in the lower LCD.
• V-Select 9 to 16 switches to one of eight user modes, where you can freely assign
parameters to V-Pots or V-Select buttons.
• V-Select 17 switches to Channel Strip Mixer view.
• V-Select 18 switches to Pan Mixer view.
• V-Select 19 switches to EQ Mixer view.
• V-Select 20 switches to Send Mixer view.
• V-Select 21 switches to Effect Assign Mixer view.
197Chapter 14 Mackie C4