9

To access Instrument Edit view
1 Hold down the CHAN STRIP button.
The channel strip overlay labels are shown on the C4 displays.
2 Press V-Select 22 (labeled Instru Mixer).
3 Insert or select an instrument, which will automatically switch the C4 to Instrument Edit
view.
Mackie C4: Cycle View Mode
In Cycle View mode, the V-Pots/V-Selects behave as follows:
• V-Pot/V-Select 1 (labeled Cycle) shows and edits the current Cycle mode status (off or
on).
• V-Select 2 (labeled BySet) matches the cycle area to selections made in the Arrange
window (selected audio or MIDI regions).
• V-Pot 3 (labeled Move) moves the current cycle area by a bar with each click of the
V-Pot, when turned.
• V-Pot 4 moves the current cycle area by a beat with each click of the V-Pot, when turned.
• The display shows the left and right locators above V-Pots 5 and 7.
• Pressing V-Select 5 picks up (uses) the current playhead position for the left locator.
• Turning V-Pot 5 changes the left locator position by bars.
• Turning V-Pot 6 changes the left locator position by beats (denominator steps).
• Pressing V-Select 7 picks up (uses) the current playhead position for the right locator.
• Turning V-Pot 7 changes the right locator position by bars.
• Turning V-Pot 8 changes the right locator position by beats (denominator steps).
To activate Cycle View mode
µ
Hold down the CHAN STRIP button, and press V-Select 31.
Mackie C4: Punch View Mode
In Punch View mode, the V-Pots/V-Selects behave as follows:
• V-Pot/V-Select 1 shows and edits the current Autopunch status (off or on).
• V-Pot 3 (labeled Move) moves the current punch in locator by a bar with each click of
the V-Pot, when turned.
• V-Pot 4 moves the current punch in locator by a beat with each click of the V-Pot, when
turned.
• The display shows the punch in and punch out locators above V-Pots 5 and 7.
• Pressing V-Select 5 picks up (uses) the current playhead position for the punch in
locator.
195Chapter 14 Mackie C4