9

Mackie C4: Pan Channel View Mode
In Pan Channel view, V-Pot 1 edits the Pan (or Balance) parameter.
To access Pan Channel view
1 Hold down the CHAN STRIP button.
The channel strip overlay labels appear on the C4 displays.
2 Press V-Select 26 (labeled Surrnd).
Mackie C4: Channel Strip Mixer View Mode
In Channel Strip Mixer view, the row order is reversed, so that the lowest row edits
parameter 1.
V-Pot row 4 (bottom row) edits the currently chosen channel parameter. Row 3 edits
channel parameter 2, row 2 edits channel parameter 3, and row 1 (at the top) edits channel
parameter 4.
The V-Pots edit the following channel parameters in this order: volume, pan/angle, input
format, input assignment, output assignment, automation mode, group, displayed
automation parameter.
To edit invisible parameters
µ
Press the BANK Left/BANK Right or SINGLE Left/SINGLE Right buttons to change the
parameter shown, and edited, in row 4.
The parameters shown in rows 1 to 3 are adjusted accordingly.
To access Channel Strip view
1 Hold down the CHAN STRIP button.
The channel strip overlay labels appear on the C4 displays.
2 Press V-Select 17.
Mackie C4: EQ Mixer View Mode
In EQ Mixer view:
• Row 1 sets the selected EQ band bypass state.
• Row 2 edits the selected EQ band frequency.
• Row 3 edits the selected EQ band gain/slope.
• Row 4 edits the selected EQ band Q factor.
• The SLOT UP and SLOT DOWN buttons select the EQ band (if a Channel EQ is inserted
in the selected channel strip).
To access EQ Mixer view
1 Hold down the CHAN STRIP button.
The channel strip overlay labels appear on the C4 displays.
191Chapter 14 Mackie C4