9

• The bottom row (row 4) consists of V-Pots 25 to 32.
Each V-Pot features an integrated V-Select button, which is activated by pressing the
(V-Pot) knob top.
The function or parameter assigned to each V-Pot/V-Select button depends on the current
view mode (see Mackie C4: View Modes), and chosen overlay (see Mackie C4: Assignment
Buttons).
V-Pots and V-Selects 1 to 8
When no overlay is active, V-Pots 1 to 8 (the top row) normally perform in the same way
as their counterparts on a Mackie Control or Mackie Control XT. See Mackie Control:
Assignment Zone.
V-Pots and V-Selects 9 to 32
These V-Pots have additional functionality in different view modes.
In Mixer (multi-channel) views, the V-Pots in rows 2, 3, and 4 usually edit the parameter
that follows the parameter edited on row 1.
In Channel view, all four rows represent a group of 32 editable parameters.
In Effect and Instrument Edit views, the C4 can be split into two groups (8/24, 16/16, or
24/8 parameters). See SPLIT Button.
Mackie C4: View Modes
The C4 provides a number of view modes that display a particular parameter type on the
V-Pots/V-Select buttons. See the following sections for details on each view mode:
• Mackie C4: Pan Channel View Mode
• Mackie C4: Channel Strip Mixer View Mode
• Mackie C4: EQ Mixer View Mode
• Mackie C4: EQ Channel View Mode
• Mackie C4: Send Mixer View Mode
• Mackie C4: Send Channel View Mode
• Mackie C4: Effect Assign Mixer View Mode
• Mackie C4: Effect Edit View Mode
• Mackie C4: Instrument Assign Mixer View Mode
• Mackie C4: Instrument Edit View Mode
• Mackie C4: Cycle View Mode
• Mackie C4: Punch View Mode
190 Chapter 14 Mackie C4