9

AssignmentModifierControl
Switches to Single view.PHASE—SHIFT
Enters Group Edit mode:
• The upper line (in the DSP Edit section) displays
the number and name of the group being
edited.
• DSP Select buttons 1 to 4 switch between the
properties of the group being edited. The group
name is shown in the lower line.
• When the INSERT/PARAM button is off, the
DSP Edit V-Pots scroll through the group
properties. If the INSERT/PARAM button is on,
the DSP EDIT V-Pots select the group that you
want to edit.
• The SELECT buttons enable/disable group
membership of the channel.
GROUP
Switches to Channel view.SHIFT/ADD
Creates a new group and enters Group Edit mode
(see above).
CREATE
Switches to Mixer view.SHIFT/ADD
Activates or deactivates the Group Clutch.SUSPEND
Switches to Tracks view.SHIFT/ADD
Mackie HUI: EDIT Section
The following table outlines the editing controls and their assignments:
AssignmentControl
—CAPTURE
—SEPARATE
Cuts the selection (of regions or events).CUT
Copies the selection.COPY
Pastes the Clipboard contents.PASTE
Deletes the selection.DELETE
Mackie HUI: Time Display
The following table outlines the time display controls and their assignments:
AssignmentControl
Lit if counter is displaying SMPTE time code.TIME CODE
Not assignedFEET
Lit if counter is displaying bars/beats/divisions/ticks.BEATS
184 Chapter 13 Mackie HUI