9

AssignmentModifierControl
Switches the bypass state of the plug-in being
edited.
BYPASS
• Assignment Pan mode:
DSP Select 1 resets pan angle.
• Assignment Send mode:
Activates or deactivates Sends 1 to 4, or mutes
5 to 8.
• Effect Assign mode:
Confirms Insert 1 to 4 or 5 to 8 effect selection,
selects this Insert slot, and enters Effect Edit
mode, showing the parameters of the chosen
effect.
• Effect Edit mode:
Sets parameter to the default value, or turns
“switching” parameters on/off.
DSP Select 1 to 4
• Assignment Pan mode:
DSP V-Pot 1 controls pan angle.
• Assignment Send mode:
Controls Send 1 to 4, or 5 to 8 Levels.
• Effect Assign mode:
Assigns effects to Insert slots 1 through 4, or 5
to 8.
• Effect Edit mode:
Controls the selected effect parameter.
DSP V-Pots
Switches between Effect Assign and Effect Edit
modes.
INSERT/PARAM
Effect Edit mode: Shifts parameter display by the
number of DSP V-Pots in the control surface group
(usually four).
SCROLL
Effect Edit mode: Shifts parameter display by one
(parameter).
CMD/ALT/FINE
Mackie HUI: Function Keys
The following table outlines the function keys and their assignments:
Note: A modifier button, such as SHIFT, below a button description indicates that the
button has an alternate use while the modifier is held down.
AssignmentModifierControl
Clears Overload LEDs.F1
Switches to Mixer view, and displays MIDI channel
strips.
SHIFT/ADD
Opens or closes Arrange window.CMD/ALT/FINE
181Chapter 13 Mackie HUI