9

AssignmentModifierControl
Undoes last editing operation.UNDO
Redoes last editing operation.SHIFT/ADD
Opens Undo History window.OPTION/ALL
Saves the project.SAVE
Performs Save As function, allowing you to save
the project with a different name.
OPTION/ALL
—EDIT MODE
Selects the next tool. While held down, numerical
buttons select a specific tool.
EDIT TOOL
Shifts to alternate mode/use for some buttons.
See descriptions of other buttons.
SHIFT/ADD
While held down, value change mode is set to
relative. This switches between a minimum,
default, or maximum value for the edited
parameter. Also see description of other buttons.
OPTION/ALL
While held down, the Group Clutch is engaged.
(All groups are disabled.)
CTRL/CLUTCH
While held down, Value Change mode is set to
Fine. All value changes work at maximum
resolution. Also see descriptions of other buttons.
CMD/ALT/FINE
Mackie HUI: Channel Strips
The following table outlines the channel strip controls and their assignments:
Note: A modifier button, such as SHIFT, below a button description indicates that the
button has an alternate use while the modifier is held down.
AssignmentModifierControl
Displays momentary and peak levels.Level meters
Activates or deactivates the Record Enable button.REC/RDY
Disables the Record Enable buttons of all channel
strips.
OPTION/ALL
179Chapter 13 Mackie HUI