9

This chapter describes how to use your Mackie HUI with Logic Express.
Important: There are a number of control surfaces—not mentioned in this guide—that
can emulate the HUI. Such devices are not supported by Apple, nor are they guaranteed
to work with Logic Express in HUI emulation mode.
This chapter covers the following:
• Setting Up Your Mackie HUI (p. 175)
• Mackie HUI: Assignment Overview (p. 176)
Setting Up Your Mackie HUI
HUI control surface devices don’t support automatic scanning. You need to manually add
these devices to your setup. When you add a device in this way, you need to assign the
MIDI In and Out port parameters.
To set up Mackie HUI devices
1 Make sure that your HUI devices are connected bidirectionally with the computer, using
a MIDI interface.
2 Choose Logic Express > Preferences > Control Surfaces > Setup.
3 Choose New > Install in the Setup window.
4 Select HUI in the Install window.
5 Click the Add button.
6 Select the added device in the Setup window, then set the MIDI In and MIDI Out
parameters as appropriate.
175
Mackie HUI
13