9

This chapter describes how to use your Mackie Baby HUI with Logic Express.
This chapter covers the following:
• Setting Up Your Mackie Baby HUI (p. 171)
• Mackie Baby HUI: Assignment Overview (p. 171)
Setting Up Your Mackie Baby HUI
Baby HUI control surface units do not support automatic scanning. You need to manually
add these devices to your setup. When you add a device in this way, you need to specify
the MIDI In and Out port parameters.
To set up Mackie Baby HUI units
1 Make sure that your Baby HUI units are connected bidirectionally with the computer,
using a MIDI interface.
2 Choose Logic Express > Preferences > Control Surfaces > Setup.
3 Choose New > Install in the Setup window.
4 Select the Baby HUI in the Install window.
5 Click the Add button.
6 Select the added device in the Setup window, then assign the MIDI Input and MIDI Out
parameters as appropriate.
Mackie Baby HUI: Assignment Overview
Assignments of Mackie Baby HUI interface elements to Logic functions are covered in the
following sections:
• Mackie Baby HUI: Channel Strips
• Mackie Baby HUI: Encoder Assignment Section
• Mackie Baby HUI: Automation Section
• Mackie Baby HUI: Display Section
171
Mackie Baby HUI
12