9

Send Mode
This mode is enabled by pressing SCENE and Pad 10. In Send mode, the channel strip
encoders control the send level of the selected send. The Pads remain in the currently
selected mode.
• Send Overlay: Pressing SETTING while the encoders are in Send mode changes the
operation of the Pads in Send mode.
AssignmentPad
Switches the send bypass state (of the currently selected send) for
the eight channel strips.
1–8
Switches the send position (pre/post fader) of the currently selected
send, for the eight channel strips.
9–16
Effect Edit Mode
This mode is enabled by pressing SCENE and Pad 13. In Effect Edit mode, the channel
strip encoders control the parameters of the currently selected effect. The Pads remain
in the currently selected mode.
• Effect Edit Overlay: Pressing SETTING while the encoders are in Effect Edit mode changes
the operation of the Pads in Effect Edit mode.
AssignmentPad
Switches the effect bypass state (of the currently selected Insert
slot) for the eight channel strips.
1–8
Korg microKONTROL and KONTROL49: Main Section
The main LCD shows information on the current mode of the encoders.
MeaningDisplay text
Encoders edit instrument parameters.<Instrument name>
Encoders edit effect parameters (the currently selected Insert slot
number is indicated on the display).
<Plug-in name>
Encoders set the automation mode.Automatn
(SETTING held down) Main encoder chooses the Insert slot number.Ins. x
Displayed while SCENE button is held down.ModePad?
Encoders control pan.Pan
Encoders control send level of send x.Send x
Channel Strip User Mode 6. Encoders are initially unassigned.User 6
Channel Strip User Mode 7. Encoders are initially unassigned.User 7
Channel Strip User Mode 8. Encoders are initially unassigned.User 8
The LCD backlight is red while recording, and green at other times.
168 Chapter 11 Korg microKONTROL and KONTROL49