9

This chapter describes how to use your JLCooper MCS3 MIDI or USB control surface with
Logic Express.
This chapter covers the following:
• Setting Up Your JLCooper MCS3 (p. 161)
• JLCooper MCS3: Assignment Overview (p. 161)
Setting Up Your JLCooper MCS3
Logic Express supports USB or MIDI versions of the JLCooper MCS3 control surface. Both
USB and MIDI versions are installed automatically when you open Logic Express. If your
MCS3 is not recognized and installed correctly, follow the steps below.
To add JLCooper MCS3 control surfaces connected via USB
1 Ensure that your MCS3 USB device is correctly connected to the computer with a USB
cable. Also ensure that the unit is powered.
2 Open Logic Express, and the MCS3 will be added to the Control Surfaces Setup window.
To add JLCooper MCS3 control surfaces connected via MIDI
1 Make sure that your MCS3 units are connected to the computer via MIDI.
2 Choose Logic Express > Preferences > Control Surfaces > Setup.
3 Choose Install in the Setup window’s New menu.
4 Select the MCS3 from the list in the Install window.
5 Click the Scan button.
JLCooper MCS3: Assignment Overview
Assignments of JLCooper MCS3 interface elements to Logic functions are covered in the
following sections:
• JLCooper MCS3: F1 to F6 Buttons
• JLCooper MCS3: W1 to W7 Buttons
161
JLCooper MCS3
10