9

This chapter describes how to use your JLCooper CS-32 MiniDesk with Logic Express.
This chapter covers the following:
• Setting Up Your JLCooper CS-32 MiniDesk (p. 151)
• JLCooper CS-32 MiniDesk: Assignment Overview (p. 152)
Setting Up Your JLCooper CS-32 MiniDesk
Follow the steps below to use your JLCooper CS-32 MiniDesk control surface with
Logic Express.
To add JLCooper CS-32 control surfaces connected via USB
1 Install the software that comes with the CS-32.
2 Ensure that the CS-32 is in Host mode.
3 Make sure that your CS-32 units are connected to the computer via USB.
USB units are installed automatically when you open Logic Express.
To add JLCooper CS-32 control surfaces connected via MIDI
1 Install the software that comes with the CS-32.
2 Ensure that the CS-32 is in Host mode.
3 Make sure that your CS-32 units are connected to the computer via MIDI.
4 Choose Logic Express > Preferences > Control Surfaces > Setup.
5 Choose Install in the Setup window’s New menu.
6 Select the CS-32 from the list in the Install window.
7 Click the Scan button.
151
JLCooper CS-32 MiniDesk
8