9

AssignmentModifierControl
In Effect and Instrument Plug-in Edit modes: shifts
the parameter bank. In other modes:
• If BANK LED is off: shifts the fader bank by one
channel.
• If BANK LED is on: shifts the fader bank by one
bank (a group of 8 channels).
Left/right buttons
In Effect and Instrument Plug-in Edit modes: shifts
the parameter bank by one parameter. In Group
Edit mode, the group parameter bank is shifted.
SHIFT
Switches mode of left/right buttons (see above).bank
Sets Select buttons to Channel View mode.SHIFT
Sets Select buttons, rotary encoders, and Multi
buttons to Group Edit mode.
group
Displays channels’ group assignments in the LCD.
The rotary encoders allow you to change
assignments.
SHIFT
CM Labs Motormix: Left Function Buttons
The following table outlines the left function button controls and their assignments:
Note: If a modifier button, such as SHIFT, is shown below a button description, it indicates
that the control has an alternate use while the modifier is held down.
AssignmentModifierControl
Currently unassignedAUTO ENBL/mode
Switches rotary encoders to Automation Enable
mode.
SHIFT
While held down, the groups are temporarily
disabled.
SUSPEND/create
Creates a new group, and enters Group Edit mode.SHIFT
Switches rotary encoders and Multi buttons to
Effect Assign mode. Use the Rotary Select knob to
choose the Insert slot you want to edit. In Effect
or Instrument Assign mode, it switches to Pan
mode. In Effect Edit mode, it switches to Effect
Assign mode. In Instrument Edit mode, it switches
to Instrument Assign mode.
PLUG-IN/compare
Switches rotary encoders and Multi buttons to
Instrument Assign mode.
SHIFT
Switches Select buttons to Window Select mode.WINDOW/tools
Switches Select buttons to Select Tool mode.SHIFT
143Chapter 6 CM Labs Motormix