9

AssignmentModifierControl
Switches the channel strip display mode between:
• Page info in upper line, parameter name in
lower line.
• Parameter name in upper line, parameter value
in lower line.
SHIFT
CM Labs Motormix: Multi Buttons
These buttons (labelled A to H) have multiple uses, depending on the current mode, as
indicated by the green and yellow LEDs to the right.
Note: If a modifier button, such as SHIFT, is shown below a button description, it indicates
that the control has an alternate use while the modifier is held down.
AssignmentModifierMode
Enables/disables bypass of currently selected insert
effect.
fx bypass
Enables/disables bypass of currently selected EQ
band, and switches rotary encoders to EQ
frequency editing.
SHIFT (eff-1)
Enables/disables bypass of currently edited send,
and switches rotary encoders to send level editing.
s-mute
Enables/disables bypass of currently selected EQ
band, and switches rotary encoders to EQ Gain
editing.
SHIFT (eff-2)
Switches between Pre and Post Fader modes of
currently edited send, and switches rotary
encoders to send level editing. Post mode is
indicated by a lit LED.
pre/post
Enables/disables bypass of currently selected EQ
band, and switches rotary encoders to (EQ) Q
factor editing.
SHIFT (eff-3)
Switches rotary encoders to Pan editing. The
parameter is chosen with the rotary selector.
select
Switches rotary encoders to channel parameter
editing.
SHIFT (eff-4)
Note: In modal dialogs, the Multi buttons generate the computer keyboard character
shown on the button face.
CM Labs Motormix: Burn Buttons
These buttons (labelled I to P) have multiple uses, depending on the current mode, as
indicated by the red LEDs to the left.
141Chapter 6 CM Labs Motormix