9

AssignmentModifierControl
Shows current selection for rotary pots:
Send/EQ editing (S-MUTE or PRE/PST LED is on):
• S1 to S8 = Send 1 to 8 level
• F1 to F8 = EQ band 1 to 8 frequency
• G1 to G8 = EQ band 1 to 8 gain
• q1 to q8 = EQ band 1 to 8 Q factor
Pan editing (select LED is on):
• Pn = Pan
Channel parameter editing (eff-4 LED is on):
• VL = Volume
• Pn = Pan
• FM = Channel input format
• In = Channel input assignment
• Ou = Channel output assignment
• Au = Automation mode
• Gr = Group membership
Assignment:
• d1 to d8 = Assign Send 1 to 8 destination.
Effect editing (DSP/compare LED is on):
• P1 to 15 = Assign Insert slot 1 to 15 to effect.
• P1. to 15. = Effect parameter editing
Instrument editing (DSP/compare LED is on):
• IA = Assign instrument to Instrument slot.
• IE. = Instrument parameter editing
Group property editing (group LED is on):
• G1 to 32 = group number
7 segment display
Selects a slot or parameter for rotary encoders,
depending on the parameter types being edited
with the rotary encoders:
• Send slot when editing send level or assigning
send destination.
• EQ band when editing an EQ parameter.
• Effect/Instrument slot when assigning an effect
or instrument.
• Pan parameter when editing a Pan parameter.
• Channel parameter when editing a channel
parameter.
• Effect/instrument parameter page when editing
an effect or instrument plug-in.
Rotary Selector
Switches Flip mode between Off and Duplicate
(faders mirror the rotary encoder assignments).
Rotary Selector push
button
140 Chapter 6 CM Labs Motormix