9

AssignmentMode
Transport section mode
• 1: Record
• 2: Pause
• 3: Stop
• 4: Play
• 5: Rewind
• 6: Fast Forward
• Upper LCD row displays current playhead position.
PLAY/transport button flashes
Locate mode
• 1: Goes to left locator.
• 2: Goes to right locator.
• 3: Enables or disables Cycle mode.
• 4: Enables or disables Autopunch mode.
• 5: Enters Marker mode (see below).
• 6: Opens Marker List.
• Upper LCD row displays current playhead position.
STOP/locate button flashes
• 1 to 6: Select markers 1 to 6. Marker names are displayed in the
upper LCD row.
• 7: Creates a new marker.
• 8: Deletes selected marker.
Marker mode
Switches between group parameters. Parameter display can be
shifted by the View left and right buttons when the SHIFT button
is held down.
Group Edit mode
Enters Effect Edit mode for the selected channel.Effect Assign mode
Enables/disables the selected parameter, or resets it to the default
value.
Effect Edit mode
Enters Instrument Edit mode for the selected (instrument) channel.Instrument Assign mode
Enables/disables the selected parameter, or resets it to the default
value.
Instrument Edit mode
Note: In modal dialogs, the Select buttons generate the computer keyboard character
shown on the button face.
CM Labs Motormix: Rotary Pots
The following table outlines the rotary pot controls and their assignments:
Note: If a modifier button, such as SHIFT, is shown below a button description, it indicates
that the control has an alternate use while the modifier is held down.
AssignmentModifierControl
Control parameter chosen with the Rotary Selector,
as displayed in the 7 segment display (see below).
Rotary pots 1 to 8
139Chapter 6 CM Labs Motormix