9

• CM Labs Motormix: Faders
• CM Labs Motormix: Right Function Buttons
CM Labs Motormix: Select Buttons
The Select buttons (buttons just below the LCD) have multiple uses, depending on the
current mode.
Note: If a modifier button, such as SHIFT, is shown below a button description, it indicates
that the control has an alternate use while the modifier is held down.
AssignmentMode
Selects channel displayed in upper LCD line. Channels can be shifted
to the left and right with the View left and right buttons.
Normal
Channel View mode: Select buttons switch between displayed
channel strips:
• 1: Switches to Single view.
• 2: Switches to Arrange view.
• 3: All view, MIDI channels
• 4: All view, input channels
• 5: All view, audio channels
• 6: All view, instrument channels
• 7: All view, aux and bus channels
• 8: All view, output and master channels
Bank button LED flashing
Window Select mode: Select buttons open, assign key focus, or
close a particular window type. LED off: If the window is not open,
the button opens it. LED on: If the window is open, but does not
have key focus, the button activates it. LED flashes: If the window
has key focus, the button closes it.
• 1: Arrange window
• 2: Mixer
• 3: Event List
• 4: Score Editor
• 5: Hyper Editor
• 6: Piano Roll Editor
• 7: Transport Bar window
• 8: Audio Bin
WINDOW/tool button LED on
Select Tool mode: Select buttons choose a tool.
• 1: Pointer
• 2: Pencil
• 3: Eraser
• 4: Text tool
• 5: Scissors
• 6: Glue tool
• 7: Solo tool
• 8: Mute tool
WINDOW/tool button flashes
138 Chapter 6 CM Labs Motormix