9

Editing Send Destinations
You edit send destinations in Aux/Sends mode, using the Aux/Sends knobset.
To edit a send destination
1 Press the Aux or Sends knob top, or key, to display all send options for the currently
selected channel strip.
Note: If using the MC Mix, press the CHAN key to enter Channel mode.
The send options are displayed on the Soft Keys, the touchscreen, or the display,
depending on the system you are using.
2 Turn the respective knob to change the send level.
Pressing a knob top sets the controlled parameter to its default level.
3 Press the Back key to return to the top-level knobset.
Changing or Setting Send Destinations
You change or set send destinations in Aux/Sends Configuration mode, using the
Aux/Sends Configuration knobset.
To change or set a send destination
1 Press the Aux or Sends knob top, or key.
Note: If using the MC Mix, press the CHAN key to enter Channel mode.
2 Press both Page keys simultaneously to switch to Send Configuration mode.
The eight Send slots of the currently selected channel strip are displayed.
3 Select the Send slot you want by pressing the respective knob top.
The first eight send destinations are displayed. You can use the Page keys to display
further send destinations (busses).
4 Choose the send destination:
• Pressing the knob top changes, or sets, a selected destination.
• Pressing the Back key navigates up one level in the menu hierarchy.
Euphonix: Using the Pan/Surround Knobset
This knobset allows you to adjust a channel strip’s Pan control.
To adjust the pan control
1 Press the Pan/Surround knob top, or key, to display the Pan parameters for the currently
selected channel strip.
Note: If using the MC Mix, press the CHAN key to enter Channel mode.
The parameter names are displayed on the Soft Keys, the touchscreen, or the display,
depending on the system you are using.
2 Turn the respective knob to change the parameter value.
133Chapter 5 Euphonix MC Pro, System 5-MC, MC Control, MC Mix, and MC Transport