9

Note: EuCon support in Logic Express works in a different way to the support of other
control surface devices. As a consequence, you cannot use the Controller Assignments
window to change assignments. See the documentation provided with your Euphonix
device for information on the use of parameters and device features. EuCon devices do
not appear in the Control Surfaces Setup window.
To set up your MC Professional device for use with Logic Express
1 Set up your device as described in the Euphonix user documentation.
2 Install the latest EuCon software on your computer. (If necessary, go to the Euphonix
website to download the most recent version.)
Note: Installing EuCon software on the MC Professional device requires the installation
of two applications—one for the MC Pro device (EuConMC software), and a second for
the computer (EuConWS client). Full details are in the Euphonix user documentation.
3 Open Logic Express.
The startup screen lets you know that Logic Express is starting EuCon.
4 On the MC Pro, press the workstation button associated with your computer.
The MC Pro display shows an Attaching to Logic Express progress bar.
To set up your MC Artist device for use with Logic Express
1 Set up your device as described in the Euphonix user documentation.
2 Install the latest EuCon software on your computer. (If necessary, go to the Euphonix
website to download the most recent software version.)
3 With the EuControl application running on your computer, open Logic Express.
Your MC Artist device will automatically connect to the application.
Euphonix: Changing the Track Display
By default, tracks are shown in the Mixer and on the display of your Euphonix device
according to the Mixer’s Arrange View mode. This means that all channel strips with
corresponding Arrange window tracks are displayed in the same order as in the Arrange
area.
Note: Redundant tracks—where multiple tracks are routed to the same channel strip—are
not accessible.
Switching the Mixer view to another mode (using the view buttons or channel strip filter
buttons) does not update the Euphonix device display. You can, however, override the
default behavior.
To switch the view of channel strips on Euphonix devices
µ
Open the Logic Express > Preferences > Control Surfaces > Setup window, and change
the Channel Strip View mode in the Control Surface Group 1 menu.
124 Chapter 5 Euphonix MC Pro, System 5-MC, MC Control, MC Mix, and MC Transport