8
Table Of Contents
- Logic Express 8 Control Surfaces Support
- Contents
- Introduction
- Basic Control Surface Setup
- Customizing Controller Assignments
- Mackie Control
- Setting Up Your Mackie Control
- Using the Mackie Control With Logic Express
- Display Zone
- Channel Strip Controls
- Master Fader
- Assignment Zone
- Fader Bank Zone
- Function Key Zone
- Global View Zone
- Modifier Buttons
- Automation Buttons
- Utilities Buttons
- Transport Zone
- Cursor Key Zone
- Jog/Scrub Wheel Zone
- Programmable User Modes
- Connecting Foot Switches
- Assignment Overview
- M-Audio iControl
- CM Labs Motormix
- Frontier Design TranzPort
- JLCooper CS-32 MiniDesk
- JLCooper FaderMaster 4/100
- Korg microKONTROL and KONTROL49
- Mackie Baby HUI
- Mackie C4
- Mackie HUI
- Radikal Technologies SAC-2K
- Roland SI-24
- Tascam FW-1884
- Tascam US-2400
- Tascam US-428 and US-224
- Yamaha 01V96
- Yamaha 02R96
- Yamaha DM1000
- Yamaha DM2000
70 Chapter 3 Mackie Control
The following table lists what each V-Pot edits in Channel view mode:
Holding SHIFT while pressing one of the MUTE or V-Pot buttons switches between
mute or bypass:
Control Action
V-Pot 1 Edits volume. The current value is shown in the lower row of the
LCD.
V-Pot 2 Edits pan. The current value appears in the lower row of the LCD.
V-Pot 3 For software instrument tracks, turn to choose the instrument.
Press the V-Pot 3 button to confirm your choice/insert the
instrument, and open the plug-in window.
V-Pot 4 For audio and software instrument tracks, turn to choose the plug-
in used in Insert slot 1. Press the V-Pot 4 button to confirm your
choice/insert the effect, and open the plug-in window.
V-Pot 5 For audio and software instrument tracks, turn to choose the plug-
in used in Insert slot 2. Press the V-Pot 4 button to confirm your
choice (insert and open, as above).
V-Pot 6 Edits the send amount level of Send 1.
V-Pot 7 As above for Send 2.
V-Pot 8 As above for Send 3.
Control Action
V-Pot 1 or Mute 1 Mutes (or unmutes) the channel strip.
V-Pot 2 or Mute 2 Mutes (or unmutes) the channel strip.
V-Pot 3 or Mute 3 For software instrument tracks, mutes (or unmutes) the software
instrument used on the channel strip.
V-Pot 4 or Mute 4 For audio and software instrument tracks, bypasses the effect plug-
in used in Insert slot 1.
V-Pot 5 or Mute 5 For audio and software instrument tracks, bypasses the effect plug-
in used in Insert slot 2.
V-Pot 6 or Mute 6 Mutes (or unmutes) Send 1.
V-Pot 7 or Mute 7 Mutes (or unmutes) Send 2.
V-Pot 8 or Mute 8 Mutes (or unmutes) Send 3.