8

48 Chapter 2 Customizing Controller Assignments
Label Field
For supported control surfaces, shows characters that represent the label for the
assignment that appears on the control surface display. Unsupported control surfaces
can only send information, not receive it, and cannot display an assignment label.
If the field contains constant text, it can contain any number of characters. When used
as a placeholder for dynamically created text, however, the field contains three
characters that represent the label. The first character is always @, followed by two
additional characters. The following tables show the possible meanings for the second
and third characters.
Second Character
Third Character
For example, “Send@s#” translates as “Send1,” “Send2,” and so on.
Character Meaning
t Track
s Send slot
S Number of sends
e EQ band
E Number of EQs
p Insert slot
i Instrument
Character Meaning
# Number of above (track number, Send slot, EQ band, Insert slot)
n Name of above
p Name of parameter addressed by the assignment
P Name of first parameter
o Parameter offset, counted from 1
O Maximum parameter offset, counted from 1
b Parameter bank (= parameter offset/bank size), counted from 1
B Total number of banks (= parameter offset/bank size), counted
from 1