8

Chapter 2 Customizing Controller Assignments 43
 Group/Track/Command/Key field/menu: These options will also change as different
Class menu options are selected.
 Bank Type pop-up menu: This menu determines the bank relationship of the assigned
parameter. This can be as per the Group setting, By One, or By Bank.
Input Message Section
 MIDI Input pop-up menu: Choose a MIDI input source (MIDI Port or Caps Lock
Keyboard). This can be changed by incoming MIDI messages—shown in the Value
Change field.
 Value Change field: Displays incoming MIDI messages that cause a value change.
 Touch/Release field: Enter an integer value to force incoming MIDI messages to
change the touch/release status of the selected parameter. This only applies to
control surfaces that offer touch-sensitive controls—where touching or releasing a
fader, for example, will enable/disable the reception of data from the control surface.
Value Section
 Min and Max fields: Enter integer values—to set the range of incoming MIDI values.
 Format pop-up menu: Choose the format used to encode negative values.
 Multiply field: Enter a value—which will scale incoming MIDI values.
 Mode pop-up menu: Choose the mode used by incoming values—to modify the
current parameter value.
Feedback pop-up menu and checkboxes: Choose the display format of the parameter
value (on the control surface display, if applicable).
Note: For detailed information about each parameter, see “Editing Controller
Assignments in Expert View” on page 47.